REGLO-Z SERİSİ

REGLO-Z

Flow rates	1 – 3290 ml/min (depending on mounted pump-head)
Motor speed	50 – 5000 rpm, adjustable in 1% steps
Speed setting	2-digit potentiometer
Speed control	Closed loop control for pressure independent speed
Analog input	Speed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog output	Speed monitoring (0–10 kHz)
Digital input (TTL level)	Start/Stop
Differential pressure	max. 5.2 bar / 75.4 psi (depending on pump-head)
Motor type	DC motor
Power consumption	50 W
Power supply	115/230VAC; 50/60Hz
Protection rating	IP 30
Depth / Width / Height	178 x 100 x 143 mm (7" x 3.9 " x 5.6 ")
Weight	2.2 kg (4.6 lb)
Accessories
Special characteristics	The rotation direction of Ismatec gear pumps is not reversible

REGLO-Z Digital

Flow rates	0.85 – 3200 ml/min (depending on mounted pump-head)
Operating panel	- 6-button membrane key-pad - LED display
Operating modes	- pumping by drive speed (rpm) - pumping by flow rate (ml/min) - dispensing by volume (ml) - dispensing by time (0.1s up to 999hrs) - dispensing by volume within a pre-set time - interval dispensing by volume with a pause - interval dispensing by time with a pause - setting the number of dispensing cycles - pause time setting (from 0.1s up to 999hrs) - back-steps for drip-free dispensing - reversible rotation direction (only for Cavity Style pumpheads)
Calibrating functions	- for flow rate (ml/min) - for dispensing volume (ml)
Motor speed	50 – 5000 rpm
Speed setting	digital speed setting (resolution 1 rpm)
Speed control	closed loop control for pressure independent speed
RS232 interfaces	- RS232 "in" - for operation controlling via PC - RS232 "out" - for cascading up to 8 pumps
Analog output	Speed monitoring (0–12 kHz)
Digital input (TTL level)	Run/Stop, autostart
Differential pressure	max. 5.2 bar / 75.4 psi (depending on pump-head)
Motor type	DC motor
Power consumption	140 W
Power supply	100 – 230 VAC / 50 – 60 Hz
Protection rating	IP 30
Depth / Width / Height	178 x 100 x 135 mm (7" x 3.9" x 5.3 ") (without pump-head)
Weight	1.7 kg (3.7 lb) (without pump-head)
Accessories	- Driver for "LabView" software (free download) -