ROTOFIX 46 / 46H

While offering a wide range of accessories for routine tasks, it also presents customized solutions for special re-quirements. In version ROTOFIX 46 H, the centrifuge can be heated to 90 °C. This allows to carry out standardized test methods for crude oil testing as well as manufacture microfluidic chips. No temperature control is required to determine the sulphuric acid content of chrome baths. Schlenk tubes which are widely used in organometallic chemistry and co-ordination complex chemistry can also be accommodated. Appropriate carriers and adapters for additional tubes may be manufactured on request.

ROTOFIX 46

Max. capacity:
in a swing-out rotor: 4 x 290 ml
in an angle rotor: 4 x 50 ml

Max. speed (RPM): 4,000 min-1

Max. RCF: 3,095

Dimensions (H x W x D): 345 x 538 x 647 mm

Weight: approx. 60 kg

Refrigeration: Air cooling

Frequently used rotors:

Angle rotor for 6 x 25 or 50 ml Schlenk tubes (45°), max. RCF 805 – Cat. No. 5616

Swing-out rotor for 6 x 30 ml chrome bath tubes (90°), max. RCF 917 – Cat. No. 4619

Swing-out rotor for max. 4 x 290 ml (90°), max. RCF 3,095 – Cat. No. 5694

ROTOFIX 46 H

Max. capacity:
in a swing-out rotor: 4 x 100 ml
in an angle rotor: 4 x 50 ml

Max. speed (RPM): 4,000 min-1

Max. RCF: 3,095

Dimensions (H x W x D): 345 x 538 x 647 mm

Weight: approx. 60 kg

Refrigeration: Air cooling

Heating: Infinitely variable up to + 90 °C (Cat. No. 4600-50), dependent on the ambient temperature

Frequently used rotors:

Swing-out rotor for 4 x 50 or 100 ml ASTM tubes (90°), max. RCF 984 – Cat. No. 4474

Angle rotor for 2 ZentriForm inserts (30°), max. RCF 519 – Cat. No. 4691

Spin coater for 4" wafers, max. RCF 896 – Cat. No. 4690

As their designated purpose is for general laboratory use only, the ROTOFIX 46 and 46 H are no medical products according to the IvD Directive. These centrifuges must, therefore, not be used for medical analyses or diagnostic purposes (clinical chemistry) within the scope of the IvD Directive.