Süt ve süt ürünlerinde yağ tayini için kullanılmaktadır. 8 bütirometre kapasitelidir. Dijital zamanlayıcıya sahiptir. Çalışma sırasında 65°C’ye otomatik olarak ısınır. Kapak kilidi ve aşırı hızlanmaya karşı koruması mevcuttur. Gerber Metoduna göre sabit 350 g dönüş hızlıdır. Ölçüleri 47 x 38 x 23 cm

The strength of the BINDER ED series heating oven: routine drying and sterilization applications up to 300 °C. Thanks to the gravity convection, thermal processes are highly efficient for this heating oven. A BINDER ED heating oven ensures fast, uniform drying.

Pump includes leading safety standards and features for superior ease of use and reduced cost of ownership, plus: Adjust the variable speed on the analog control knob from 10 - 600 rpm. Your speed is held constant even under changing loads This model features electronic speed control at an accuracy rate of ± 2 % At the press of a button the pump operatesclockwise or counter-clockwise Flow rates of 0.8 - 790 ml/min with single-channel pump heads Low speed range from 10 - 120 rpm This...

Ideal for high temperature application up to 1200℃for ashing organics, heat treating tools and ties,heat treating glasses and melting experiments.

PAF series models are particularly designed for Ashing under difficult conditions in laboratory environment. Especially when difficult to ash materials are employed we would particularly recommend the PAF series of furnaces.

Some of laboratory processes where atmosphere control is vital, require a tube furnace to be used. Alser AS manufactures tube furnaces of various tube diameters and heated lengths. Through application of Kanthal wire and silicon carbide heating elements the temperature range extends to 1600°C as operation temperature.

Precisely designed for customers' convenience by supplementing the defect of water-cooled system. Reduced noise helps obtain the maximum productivity in the comfortable environment. Excellent cooling efficiency displays the cooling effect improved by 10% vis-a-vis air-cooled system (in case the cooling water is good). A full preparation was made for safe operation by detecting freeze and pressure overheating automatically in advance with various protection and safety devices in accordance...

ATAGO’s new polarimeter offers robust performanceand ultimate efficiency in small footprint.

Conversion to pre-treated feed Eliminates descalingImproves distillate purityUse with any pre-treated water sourceNo loss of treated waterThe WCK/N is a simple conversion kit available so that the Aquatron® water still can be operated from a pre-treated feed. Suitable sources of pretreatment are almost any model of deioniser or reverse osmosis unit or a piped supply of treated water.The pre-treated water is fed directly to the boiler and cooling water is supplied to the condenser separately....

Nova safety bench-top centrifuge with rotor for fat determination according to Dr.N.Gerber.

Nova safety bench-top centrifuge with rotor for fat determination according to Dr.N.Gerber.

Pump includes leading safety standards and features for superior ease of use and reduced cost of ownership, plus: Adjust the variable speed on the analog control knob from 10 - 600 rpm. Your speed is held constant even under changing loads This model features electronic speed control at anaccuracy rate of ± 2 % At the press of a button the pump operates clockwise or counter-clockwise Flow rates of 3.6 - 3,900 ml/min with single-channel pump heads High speed range from 50 - 600 rpm This...

The PVS is a dynamic coaxial cylinder, controlled shear rate rheometer allowing quick and easy viscosity measurements under pressure at temperatures where sample boil-off is a problem.

Kanthal Super Molibdenum Disiliside Heated Chamber Furnaces cover the range of 1500°C to 1800°C. MoS-B series of furnaces are Table Top applications and cover a range of 1-8 litres, with elements placed at sides of chamber. In this range we think our 1-2 litre furnaces are quite interesting for those who require the temperature but not the volume. For small samples these furnaces will provide a very economical solution.

Extremely broad temperature range and rapid temperature changes: LAUDA Integral XT LAUDA Integral XT process thermostats allow extremely rapid temperature changes, resulting from the low volume of internal, thermally active, heat transfer medium. The instruments achieve an extremely broad temperature range and rapid temperature changes: LAUDA Integral XT efficient flow principle with a broad working temperature range. The process thermostats are used where rapid temperature changes or high...

GENERAL SPECIFICATIONS Stable temprature with double-sealed silicon gasket Rim-heating system to prevent ice collecting on the gasket Vacuum relif port for easy door opening  Automatic timer restart system after power failure  Washable condenser filter  Eye level mounted controller  Four inner doors minimize cold air loss CFC-free refrigerant system  Special designed large capacity air-cold condenser and aero-dynamic fan  Exclusive LBP hermetic compressor enable quiet,...

Maximum performance in microlitre centrifugation coupled with reliability in daily laboratory routine.

The Equinox 5000 is a multi purpose X-ray diffractometer designed specifically for high level research applications including powder analysis, thin layer analysis, reflectometry, micro diffraction, .... The system utilizes a unique tall vertical goniometer in θ/θ or θ/2θ mode and the user has a large choice of features including higher resolution detectors and a large choice of X-ray sources. The free space in the sample compartment is very large and will accommodate practically any sample...

Fully automatic operation. High purity pyrogen free output. Low temperature distillate. Operates from any raw water supply. Reservoir level control. Simple conversion to pre-treated feed. Supplied with wall mounting bracket. Safety features allow unattended operation. Simple to clean

his centrifuge stands out due to its exceptional engine smoothness. That it is largely free of vibration and has swing out butyrometer buckets positively effects the lifetime of your butyrometers. Correspondingly, good results (reproducibility and comparability) are assured. For these reasons, the SuperVario-N is often used as a reference centrifuge for calibration purposes. Due to its versatility, the SuperVario-N is widely accepted in dairy laboratories.

Pump includes leading safety standards and features for superior ease of use and reduced cost of ownership, plus: Control speed (rpm), direction and On/Off function via analog interface for 0 - 10 V or 4 - 20 mA Adjust the variable speed from 5.0 - 600 rpm on the analog control knob. Your speed is held constant even under changing loads This model features electronic speed control at an accuracy of ± 3.5 % This model connects to an optional foot-pedal remote controlvia cable to start and...

Kanthal Super Molibdenum Disiliside Heated Chamber Furnaces cover the range of 1500°C to 1800°C. MoS-B series of furnaces are Table Top applications and cover a range of 1-8 litres, with elements placed at sides of chamber. In this range we think our 1-2 litre furnaces are quite interesting for those who require the temperature but not the volume. For small samples these furnaces will provide a very economical solution.

-90...300 °C LAUDA Integral XT process thermostats allow extremely rapid temperature changes, resulting from the low volume of internal, thermally active, heat transfer medium. The instruments achieve an extremely broad temperature range and rapid temperature changes: LAUDA Integral XT efficient flow principle with a broad working temperature range. The process thermostats are used where rapid temperature changes or high refrigeration and heating performance are required.  The Integral...

GENERAL SPECIFICATIONS Double Controller OPERON’s exclusive, independent controlled up-right double door Freezer  Independent temperature control according to the sample need Frequently used samples can be stored in the top chamber while long-term storage items remain undisturbed in the bottom stable temperature with triple silicon gasket Rim-heating system to prevent ice collecting on the gasket Vacuum relief port for easy door opening Automatic timer restart system after power...

Efficiency and safety are key requisites in today’s laboratories – whether for research or routine tasks. Whenever centrifuges are incorporated to working processes, they need to deliver good separation results quickly and safely.

All glass construction. Two independent safety thermostats. Safety reservoir full shut off. Wall mountable. Silica sheathed heaters.

Pump includes leading safety standards and features for superior ease of use and reduced cost of ownership, plus: Control speed (rpm), direction and On/Off function viaanalog interface for 0 - 10 V or 4 - 20 mA Adjust the variable speed from 5.0 - 600 rpm on the analog control knob. Your speed is held constanteven under changing loads This model features electronic speed control at anaccuracy of ± 3.5 % This model connects to an optional foot-pedal remote control via cable to start and...

The “PLF-FF” series furnaces which are fiber free at their hot surface. This series is especially designed for Customers who are anxious of contamination due to flaking of the fiber insulation.

Economical price. Glass construction with long life metal heating element. Two independent safety thermostats. Wall mountable.

Pump includes leading safety standards and features for superior ease of use and reduced cost of ownership, plus: Control speed (rpm), direction and On/Off function via analog interface for 0 - 10 V or 4 - 20 mA or digital RS 232 interface Flow characteristic of pump heads in combination with various tubing diameters is pre-programmed for accurate flow rate numbers Digital read-out of: - Speed (rpm)- Tubing diameter- Flow rate in ml/min- Dosing volume- Interval dosing- Pause...

Efficiency and safety are key requisites in today’s laboratories – whether for research or routine tasks. Whenever centrifuges are incorporated to working processes, they need to deliver good separation results quickly and safely.

The SCF2 is a compact microcentrifuge for centrifugation of up to 12 x 1.5ml or 2.2ml microfuge tubes or four strips of 8 x 0.2ml tubes at speeds of up to 13,500rpm. The unit is supplied with adaptors for use with the fixed angle rotor to enable 0.2ml tubes to be centrifuged. The rotors are easily installed without the use of tools. Centrifugation speed can be displayed as either rpm or rcf and the timer can be set for run times of between 1 and 30 minutes. In addition, a pulse button enables a...

Refrigerated version of 2-16P Universal laboratory centrifuge for swing-out and angle rotors Spincontrol L Illuminated keys for start, stop, lid open For sedimentation up to 4 x 100 ml in swing-out-rotors or up to 20.000 x g in angle rotors Brushless drive practically maintenance-free Speed range up to 15.300 rpm Low speed operation from 100 rpm possible A magnetic rotor identification prevents rotors from overspeeding, active rotor identification Stainless steel bowl Imbalance...

Refrigerated version of SIGMA 3-16L Universal table top centrifuge Speed range up to 15.300 rpm Spincontrol L Various angle and swing-out rotors available Maximum capacity of 4 x 400 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor Magnetic rotor identification prevents the rotor from overspeeding, active rotor identification Stainless steel bowl Window in the lid for external speed control Backlit keys for start, stop, lid...

Universal refrigerated table top centrifuge; speed range up to 18.000 rpm Spincontrol S Iluminated keys for start, stop, lid open Various angle and swing-out rotors available Maximum capacity of 4 x 400 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A microcontroller controls speed or gravitational field, time and temperature Suitable for low speeds e.g. for cell sedimentation, accuracy +/– 1 rpm Magnetic rotor identification...

High speed refrigerated bench top centrifuge for max. speed 30.000 rpm, gravitationals fields up to more than 65.000 x g Spincontrol S Only 57 cm wide Brushless drive practically maintenance free Reliable drive system A microcontroller controls time, temperature, speed or g-force Illuminated symbol keys start, stop, lid open Window in the centrifuge lid for external speed control Very low noise level Possibility of precooling rotors during standstill, refrigerant R404a,...

Refrigerated version of SIGMA 4-16S Universal table top centrifuge Speed range up to 15.000 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell...

Heated version of 2-16KL Universal laboratory centrifuge for swing-out and angle rotors Spincontrol L Illuminated keys for start, stop, lid open For sedimentation up to 4 x 100 ml in swing-out-rotors or up to 20.000 x g in angle rotors Brushless drive practically maintenance-free Speed range up to 15.300 rpm Low speed operation from 100 rpm possible A magnetic rotor identification prevents rotors from overspeeding, active rotor identification Stainless steel bowl Imbalance...

Universal laboratory centrifuge for swing-out and angle rotors Spincontrol Universal Illuminated keys for start, stop, lid open For sedimentation up to 4 x 100 ml in swing-out-rotors or up to 20.000 x g in angle rotors Brushless drive practically maintenance-free Speed preselection up to 15.000 rpm Low speed operation from 100 rpm possible A magnetic rotor identification prevents rotors from overspeeding, active rotor identification Stainless steel bowl Imbalance switch No need to...

SIGMA 2-6E centrifuge   Laboratory centrifuge for small and middle sample sizes. Spincontrol Easy Illuminated symbol keys start, stop, lid open Brushless drive practically maintenance-free. Speed preselection up to 3.900 rpm.Low speed operation from 100 rpm possible. Double lid locking device with latches Automated opening of lid; switchable. Accoustic signal; switchable. No need to open the casing for emergency lid lock release Window in the centrifuge lid for external speed...

Universal table top centrifuge Speed range up to 15.300 rpm Spincontrol L Various angle and swing-out rotors available Maximum capacity of 4 x 400 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor Magnetic rotor identification prevents the rotor from overspeeding, active rotor identification Stainless steel bowl Window in the lid for external speed control Backlit keys for start, stop, lid open Wearless electric fuse Imbalance...

Heated version of SIGMA 3-18KS Universal refrigerated table top centrifuge; speed range up to 18.000 rpm Spincontrol S Iluminated keys for start, stop, lid open Various angle and swing-out rotors available Maximum capacity of 4 x 400 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A microcontroller controls speed or gravitational field, time and temperature Suitable for low speeds e.g. for cell sedimentation, accuracy +/– 1...

Heated version of SIGMA 3-30KS High speed refrigerated bench top centrifuge for max. speed 30.000 rpm, gravitationals fields up to more than 65.000 x g Spincontrol S Only 57 cm wide Brushless drive practically maintenance free Reliable drive system A microcontroller controls time, temperature, speed or g-force Illuminated symbol keys start, stop, lid open Window in the centrifuge lid for external speed control Very low noise level Possibility of precooling rotors during standstill,...

Heated version of SIGMA 4-16KS Universal table top centrifuge Speed range up to 15.000 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation,...

Universal table top centrifuge speed range up to 13.500 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm Magnetic rotor...

Table top centrifuge; speed range up to 4.700 rpm Control unit Spincontrol L Optimized for swing-out applications Lid can easily be opened due to pneumatic spring support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor. A microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm Stainless steel...

SIGMA 6-16HS heated version of SIGMA 6-16S Max. rotor temperature +60°C Special for ASTM crude oil centrifugation max. +70°C Universal table top centrifuge speed range up to 13.500 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or...

Refrigerated version of SIGMA 6-16S Universal table top centrifuge Speed range up to 15.000 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell...

Universal table top centrifuge speed range up to 13.500 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm Magnetic rotor...