PC 3001 VARIOpro EK Peltronic This VARIO® chemistry pumping unit provides vacuum control by precise and continuous adaptation of the diaphragm pump´s motor speed. The on-demand motor speed control extends diaphragm lifetime considerably. The basic pump is the MD 1C VARIO-SP which meets high vacuum requirements for most high boiling solvents. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The electronic emission condenser...

Color can make or break a product. Metallics, pearlescents, and other complex special effect finishes deliver limitless possibilities for enhancing product appeal. And limitless challenges as well. Duplicating complex colors from part to part is no easy task.

High speed refrigerated bench top centrifuge for max. speed 30.000 rpm, gravitationals fields up to more than 65.000 x g Spincontrol S Only 57 cm wide Brushless drive practically maintenance free Reliable drive system A microcontroller controls time, temperature, speed or g-force Illuminated symbol keys start, stop, lid open Window in the centrifuge lid for external speed control Very low noise level Possibility of precooling rotors during standstill, refrigerant R404a,...

  Technical dataUnitME 16C NT VARIO Vacuum controller   CVC 3000 Number of heads / stages   8 / 1 Max. pumping speed m3/h 19.3 Max. pumping speed cfm 11.4 Ultimate vacuum (abs.) mbar/torr 70 / 53 Ultim. vac. (abs.) with gas ballast mbar/torr 100 / 75 Ambient temperature range (operation) °C 10 - 40 Ambient temperature range (storage) °C -10 - 60 Max. back pressure (abs.) bar 1.1 Inlet connection   Small flange KF DN...

PC 201 NT This chemistry pumping unit has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens with high boiling solvents. The manual flow control valve regulates the effective pumping speed at the vacuum connection; the vacuum manometer offers an analog vacuum display. The separator at the inlet (AK), made of...

Immersion coolers

Color can make or break a product. Metallics, pearlescents, and other complex special effect finishes deliver limitless possibilities for enhancing product appeal. And limitless challenges as well. Duplicating complex colors from part to part is no easy task. X-Rite has answers. Our MA98 spectrophotometer is an intelligent, hand-held tool with the power to provide reliable, consistent data on special effect coatings that were formerly impossible to measure.

Refrigerated version of SIGMA 4-16S Universal table top centrifuge Speed range up to 15.000 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell...

PC 610 NT Chemistry pumping units of the PC 600 series are well-proven for vacuum generation and control for many evaporation processes. The basic pump is the three-stage chemistry diaphragm pump MD 4C NT which meets high vacuum requirements for most high boiling solvents. Typical applications are rotary evaporators and vacuum drying ovens. The pumping unit is equipped with a vacuum controller CVC 3000 with solenoid valve for electronic vacuum control. The exhaust vapor condenser is...

Overview of accessories for constant temperature equipment

Heated version of 2-16KL Universal laboratory centrifuge for swing-out and angle rotors Spincontrol L Illuminated keys for start, stop, lid open For sedimentation up to 4 x 100 ml in swing-out-rotors or up to 20.000 x g in angle rotors Brushless drive practically maintenance-free Speed range up to 15.300 rpm Low speed operation from 100 rpm possible A magnetic rotor identification prevents rotors from overspeeding, active rotor identification Stainless steel bowl Imbalance...

Compact refrigerated floor standing centrifuge for universal use in blood banks, clinical laboratories Capacity up to 6 x 1.5 l or 12 blood bags in swing-out rotor Solid construction, suitable for continuous use Maintenance-free drive, high imbalance tolerance up to approx. 80 g, imbalance switch Speed range 100 – 5,100 rpm Automatic rotor identification prevents overspeeding of rotors Efficient refrigerating machine; temperature adjustable between –20 °C and +40 °C, standstill...

PC 3004 VARIO VARIO® pumps and pumping units provide precise vacuum control by adaptation of the diaphragm pump´s motor speed. They feature fully automatic evaporation control on the push of a button. The basic pump is the three-stage MD 4C NT VARIO chemistry diaphragm pump which meets high vacuum requirements for most high boiling solvents. The PC 3004 VARIO offers a well proven choice for evaporation of large amounts of solvents. The separator at the inlet, made of glass with protective...

Tensiometer for measuring surface and interfacial tension

Universal laboratory centrifuge for swing-out and angle rotors Spincontrol Universal Illuminated keys for start, stop, lid open For sedimentation up to 4 x 100 ml in swing-out-rotors or up to 20.000 x g in angle rotors Brushless drive practically maintenance-free Speed preselection up to 15.000 rpm Low speed operation from 100 rpm possible A magnetic rotor identification prevents rotors from overspeeding, active rotor identification Stainless steel bowl Imbalance switch No need to...

Compact refrigerated floor standing centrifuge for universal use in blood banks, clinical laboratories and research Capacity up to 6 l in angle rotor; 12 x 1 l, 6 x 1.5 l or 12 blood bags in swing-out rotor Solid construction, suitable for continuous use Maintenance-free drive, high imbalance tolerance up to approx. 80 g, imbalance switch Speed range 100 – 10,500 rpm Automatic rotor identification prevents overspeeding of rotors Efficient refrigerating machine; temperature adjustable...

PC 3012 NT VARIO These VARIO® pumping units feature a very high pumping speed even close to the outstanding ultimate vacuum and are ideal for high vacuum requirements with most high boiling solvents. They provide precise vacuum control by continuously adjusting the pump´s motor speed. The controller provides fully automatic evaporations without any need for parameter input. The pump design offers exceptionally high chemical resistance supporting almost universal usage in chemistry and...

SIGMA 2-6E centrifuge   Laboratory centrifuge for small and middle sample sizes. Spincontrol Easy Illuminated symbol keys start, stop, lid open Brushless drive practically maintenance-free. Speed preselection up to 3.900 rpm.Low speed operation from 100 rpm possible. Double lid locking device with latches Automated opening of lid; switchable. Accoustic signal; switchable. No need to open the casing for emergency lid lock release Window in the centrifuge lid for external speed...

PC 3012 NT VARIO DUO The VARIO® DUO pumping units are consisting of a combination of two individual VARIO® pumping units, connected in parallel on the suction side and driven synchronously by one vacuum controller CVC 3000. The vacuum is controlled accurately. The speed of the two individual pumps is exactly adjusted to the vacuum needs. The controller allows both fully automatic distillations without any user pre-settings as well as specific and reproducible program sequences. The...

The LAUDA PTT is the smallest serialized laboratory thermostat of its class. It contains control and operation electronics, heat flow elements and a mini magnetic stirrer. Thanks to its small dimensions, the thermostating unit is suited to use in the new LAUDA TD 3 tensiometer and for stand-alone applications as well as in combination with other analysis equipment. Specs: Technical Properties   PTT Working temperature range °C 5…80 (Standard) Sample volume...

The SP60 Portable Sphere Spectrophotometer is a convenient, cost-efficient instrument designed to provide fast, precise color measurement information on a wide range of materials, such as paper, paint, plastics, and textiles. Absolute and difference measurements are obtained for the following colorimetric systems: L*a*b*, ∆L*∆a*∆b•, L*C*hº, ∆L•∆C*∆H*, ∆E*ab, ∆ECMC, ∆E CIE94, XYZ, Whiteness and Yellowness per ASTM E313-98.

Universal table top centrifuge Speed range up to 15.300 rpm Spincontrol L Various angle and swing-out rotors available Maximum capacity of 4 x 400 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor Magnetic rotor identification prevents the rotor from overspeeding, active rotor identification Stainless steel bowl Window in the lid for external speed control Backlit keys for start, stop, lid open Wearless electric fuse Imbalance...

Single-fluid Heat Transfer Technology from -150 to 400 °C

The SP62 Portable Sphere Spectrophotometer is convenient, cost-efficient and designed to provide fast, precise color measurement information on a wide range of materials, such as paper, paint, plastics, and textiles. Absolute and difference measurements are obtained for the following colorimetric systems, including: L*a*b*, ∆L*∆a*∆b•, L*c*h˚, ∆L•∆C*∆H*, ∆E*ab, ∆ECMC, ∆E CIE94, XYZ, Whiteness and Yellowness per ASTM E313-98.

Heated version of SIGMA 3-18KS Universal refrigerated table top centrifuge; speed range up to 18.000 rpm Spincontrol S Iluminated keys for start, stop, lid open Various angle and swing-out rotors available Maximum capacity of 4 x 400 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A microcontroller controls speed or gravitational field, time and temperature Suitable for low speeds e.g. for cell sedimentation, accuracy +/– 1...

Universal systems up to 400 °C

The SP64 Portable Sphere Spectrophotometer is a versatile instrument designed to provide fast, precise color measurement information on a wide range of materials, such as paper, paint, plastics, and textiles. Absolute and difference measurements are obtained for the following colorimetric systems: CIE XYZ, CIE Yxy, CIE L*a*b*, Hunter Lab, CIE L*c*h˚, CMC, CIE94, Whiteness and Yellowness per ASTM E313-98, Metamerism Index and DIN 6172 + AATCC Gray Scale.

Heated version of SIGMA 3-30KS High speed refrigerated bench top centrifuge for max. speed 30.000 rpm, gravitationals fields up to more than 65.000 x g Spincontrol S Only 57 cm wide Brushless drive practically maintenance free Reliable drive system A microcontroller controls time, temperature, speed or g-force Illuminated symbol keys start, stop, lid open Window in the centrifuge lid for external speed control Very low noise level Possibility of precooling rotors during standstill,...

Cooling systems from -100 up to 150 °C

Heated version of SIGMA 4-16KS Universal table top centrifuge Speed range up to 15.000 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation,...

Systems for the use of primary energy from -150 up to 400 °C

Universal table top centrifuge speed range up to 13.500 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm Magnetic rotor...

Process circulation chillers for industrial applications with cooling capacities up to 265 kW at working temperatures from -5 up to 25 °C in ambient conditions from -15 up to 50 °C  

Table top centrifuge; speed range up to 4.700 rpm Control unit Spincontrol L Optimized for swing-out applications Lid can easily be opened due to pneumatic spring support Maximum capacity of 4 x 650 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor. A microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm Stainless steel...

SIGMA 6-16HS heated version of SIGMA 6-16S Max. rotor temperature +60°C Special for ASTM crude oil centrifugation max. +70°C Universal table top centrifuge speed range up to 13.500 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or...

Refrigerated version of SIGMA 6-16S Universal table top centrifuge Speed range up to 15.000 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell...

Universal table top centrifuge speed range up to 13.500 rpm Control unit Spincontrol S Various angle and swing-out rotors available Lid can easily be opened due pneumatic swing support Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time 2 Motorized lid locks Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm Magnetic rotor...